Advances in Solid Oxide Fuel Cells: Ceramic Engineering and Science Proceedings, Volume 26, Number 4 By
2006 | 316 Pages | ISBN: 1574982346 | PDF | 25 MB
Due to its many potential benefits, including high electrical efficiency and low environmental emissions, solid oxide fuel cell (SOFC) technology is the subject of extensive research and development efforts by national laboratories, universities, and private industries. This collection of papers provides valuable insights on materials-related aspects of fuel cells such as SOFC component materials, materials processing, and cell/stack design, performance, and stability. Emerging trends in electrochemical materials, electrodics, interface engineering, long-term chemical interactions are also covered.Content: Chapter 1 Worldwide SOFC Technology Overview and Benchmark (pages 3-14): Ludger Blum, Wilhelm A. Meulenberg and Heinz NabielekChapter 2 U.S. Doe Solid Oxide Fuel Cells: Technical Advances (pages 15-22): Mark C. Williams, Joseph P. Strakey and Wayne A. SurdovalChapter 3 Single?Step Co?Firing Technique for SOFC Fabrication (pages 25-32): Guosheng Ye, Feng Ju, Chuangang Lin, Srikanth Gopalan, Uday Pal and Donald SeccombeChapter 4 Fabrication and Properties of an Anode?Supported Tubular IT?SOFC Based on Lanthanum Gallate (pages 33-40): Nigel Sammes and Yanhai DuChapter 5 Low Cost SOFC Manufacturing Process (pages 41-47): Iouri Balachov, P. Jayaweera, M. Hornbostel, A. Sanjurjo, A. S. Lipilin, B. L. Kyzin, D. I. Bronin, Yu. G. Yatluk and V. V. SevastianovChapter 6 Y2O3?Stabilized ZrO2 Aerogels Prepared from an Epoxide Assisted Solgel Synthesis for Use in SOFC Composite Cathodes (pages 49-56): Christopher N. Chervin, Hsiang Wei Chiu, Susan M. Kauzlarich, Brady J. Clapsaddle, Robert S. Glass and Joe H. SatcherChapter 7 Pulsed Laser Deposition of Bace0.85Y0.15O3 Films (pages 57-63): F. W. Dyny and A. SayirChapter 8 Electrochemical Characterization of Vacuum Plasma Sprayed Planar Solid Oxide Fuel Cells and Short Stacks for Mobile Application (pages 67-74): M. Lang, A. Dresel, T. Franco, Z. Uhan, A. Nestle, G. Schiller and P. SzaboChapter 9 Single Cell Testing and Performance Analysis of Planar Solid Oxide Fuel Cells (pages 75-82): Mirko Antloga, Richard Goettler, Kurt Kneidel and Liang XueChapter 10 Long?Term SOFC Stability with Coated Ferritic Stainless Steel Interconnect (pages 83-87): S. P. Simner, M. D. Anderson, G?G Xia, Z. Yang and J. W. StevensonChapter 11 Chemical Diffusion and Hydrogen Separation Properties of Lanthenum Ferrite and Doped Ceria Composite Mixed Conductors (pages 91-98): Annamalai Karthikeyan, Hengdong Cui, Srikanth Gopalan and Uday B. PalChapter 12 Vapor Phase Silica Transport During SOFC Operation at 1000°C (pages 99-110): Prabhakar Singh and Shailesh D. VoraChapter 13 The Effect of Inverter Ripple on Solid Oxide Fuel Cell Performance (pages 111-117): Christopher Johnson and Randall GemmenChapter 14 Study of Praseodyium Strontium Manganite for the Potential Use as a Solid Oxide Fuel Cell Cathode (pages 121-128): Matthew E. Pfluge, Max C. Deibert, Greg W. Coffey and Larry R. PedersonChapter 15 Chromium Poisoning Effects on Various Cathodes (pages 129-138): Jin Yong Kim, Nathan L. Canfield, Larry A. Chick, Kerry D. Meinhardt and Vince L. SprenkleChapter 16 Anomolus Shrinkage of Lanthanum Strontium Manganite (pages 139-149): Benjamin McCarthy, Harlan Anderson, Xaio?Dong Zhou, Larry Pederson, Gregory Coffey and Prabhakar SinghChapter 17 Development and Characterization of SOFC NI?YSZ Anodes Using Highly Porous NI Foam (pages 151-158): S. F. Corbin, R. M. Clemmer and Q. YangChapter 18 High Purity H2/H2O/Nickel/Stabilized Zirconia Electrodes at 500°C (pages 159-168): J. Hogh, T. Jacobsen, K. Vels Hansen, K. Norrman, I. Chorkendorff and M. MogensenChapter 19 Characterization of Pore Structure of Electrodes of Solid Oxide Fuel Cells (pages 169-176): Akshaya Jena and Krishna GuptaChapter 20 Influence of Processing Parameters on Porosity of NiO?YSZ Solid Oxide Fuel Cell Anode Material (pages 177-183): G. Rajaram, Z. Xu, X. Jiang, D. M. Pai, J. Filatovs and J. SankarChapter 21 Property Control of Cathodes and Anodes Produced by Slip Casting for Planar Solid Oxide Fuel Cells (pages 185-190): Zhigang Xu, Gukan Rajaram, Devdas Pai and Jag SankarChapter 22 Surface Modification of Ferritic and NI Based Alloys for Improved Oxidation Resistance in Sofc Applications (pages 193-200): Paul D. Jablonski, David E. Alman and Steven C. KungChapter 23 Ferritic Stainless Steel SOFC Interconnects with Thermally Grown (Mn, Co)3O4 Spinel Protection Layers (pages 201-208): Zhenguo Yang, Guanguang Xia, Steve P. Simner and Jeffry W. StevensonChapter 24 Chemical Reaction Behavior Between Glass?Ceramic Sealants and High Chromium Ferritic Steels Under Various SOFC Conditions (pages 209-216): S. M. Gross, T. Koppitz and N. H. MenzlerChapter 25 Electrical Contacts Between Cathodes and Metallic Interconnects in Solid Oxide Fuel Cells (pages 217-224): Zhenguo Yang, Guanguang Xia and Jeffry W. StevensonChapter 26 Finite Element Analysis of the Bonded Compliant Seal Design-A New Sealing Concept for Use in Planar Solid Oxide Fuel Cells (pages 227-237): B. J. Koeppel and K. S. WeilChapter 27 Glass?Ceramic Materials of the System BaO?CaO?SiO2 as Sealants for SOFC Applications (pages 239-245): S.?M. Gross, T. Koppitz, J. Remmel and U. ReisgenChapter 28 Layered Composite Seals for Solid Oxide Fuel Cells (SOFC) (pages 247-255): Raj N. Singh and S. S. PariharChapter 29 Glass MICA Composite Seals for Solid Oxide Fuel Cells (pages 257-264): Yeong?Shyung Chou, Jeffry W. Stevenson and Prabhakar SinghChapter 30 Combined Ageing and Thermal Cycling of Compressive MICA Seals for Solid Oxide Fuel Cells (pages 265-272): Yeong?Shyung Chou, Jeffry W. Stevenson and Prabhakar SinghChapter 31 Mechanical Properties of SOFC Seal Glass Composites (pages 275-283): Sung R. Choi and Narottam P. BansalChapter 32 Fracture Energies of Brittle Sealants for Planar Solid Oxide Fuel Cells (pages 285-291): Jurgen Malzbender, Rolf W. Steinbrech, Lorenz Singheiser and Peter BatfalskyChapter 33 Failure Probability of Solid Oxide Fuel Cells (pages 293-298): JURgen Malzbender, Rolf W. Steinbrech and Lorenz SingheiserChapter 34 Creep Deformation of NI/YSZ Cermet in SOFCS (pages 299-306): Wenning Liu and Jianmin QuChapter 35 A Numerical Simulation Tool for Fracture Analysis in Solid Oxide Fuel Cells (pages 307-314): Janine Johnson and Jianmin QuChapter 36 Activity and Structure of Perovskites as Diesel Reforming Catalysts for Solid Oxide Fuel Cell (pages 317-324): Di?Jia Liu and Michael Krumpelt
Free Download
TakeFile Download Links Here
https://takefile.link/siti0wi2ipqt/vpu4f.rar.html
Fikper Download Links Here
https://fikper.com/1TkeJO1Ycc/vpu4f.rar.html
Links are Interchangeable - Single Extraction
Книги
