https://i124.fastpic.org/big/2024/1116/79/5df01f4a61e1db81cfc0dc0030079479.jpg
Esxi And Vsphere Vswitch Config With Gns3
Published 10/2024
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz
Language: English | Size: 1.24 GB | Duration: 2h 38m
vSphere Distributed Switch Home Lab
What you'll learn
vSphere Distributed Switch Configuration
Trunking with Cisco L2 Switch on GNS3
MS Loopback Adapter Config and Mapping to VMNICs
Virtualization with ESXi 7 and vSphere 7 vCenter Config
Requirements
Networking,Virtualization Knowledge is must
Description
A distributed virtual switch is like a template stored in vCenter. When you create a distributed virtual switch in vCenter, identical hidden standard vSwitches are created on all ESXi hosts added to VDS configuration. If you create a port group for VLAN on a distributed virtual switch, the same port group will be created on all vSwitches of ESXi hosts associated to that VDS. You only need to create a port group once, which is a significant advantage. A distributed virtual switch created in vCenter is a control plane (used for management) and hidden standard vSwitches on ESXi hosts are the IO plane (responsible for network operation).vCenter is a management system for vSphere environment, including a distributed virtual switch. If, for some reason, vCenter Server is unavailable, you will not be able to change VMware distributed switch configuration, including reconnecting virtual machines to other port groups. However, even if vCenter is offline, a network will remain in a working state because hidden standard vSwitches (the IO plane) are responsible for network operation. Keep in mind that vCenter cannot be connected to a distributed virtual switch.vCenter Distributed Switch VLANs - DportGroups will Connect to the Cisco L2 Switch Trunk through the already configured MS Loopback Adapters/VMNICs and attached to the ESXi Hosts. We Dont need to assign IP Addresses for the MS LoopBac Adapters in Windows11. Since While Configuring the DPortGroups We will be specifying the VLANs to get mapped and the VMs which are going to sit in those VLANs will have their Subnet Range, Which will match with the Cisco L2 Switch VLANs and SVIs(Switch Virtual Interfaces) Configured.
Overview
Section 1: Introduction
Lecture 1 Introduction
Section 2: ESXi-7 Host Installation
Lecture 2 ESXi-7 Host Installation
Section 3: vCenter vSphere Installation
Lecture 3 vCenter vSphere Installation
Section 4: GNS3 with Cloud Adapters and ESXi Integration
Lecture 4 GNS3 with Cloud Adapters and ESXi Integration
Section 5: Introduction to vSwitch
Lecture 5 Introduction to vSwitch
Section 6: Creating Standard vSwitch VSS
Lecture 6 Creating Standard vSwitch VSS
Section 7: Creating Distributed Switch (dvSwitch) in vSphere
Lecture 7 Creating Distributed Switch (dvSwitch) in vSphere
Section 8: dvSwitch (Distributed Switch) Config in vSphere with GNS3
Lecture 8 dvSwitch (Distributed Switch) Config in vSphere with GNS3
Section 9: Thanks.!
Lecture 9 Thanks.!
Experienced Engineers with Virtualization
https://images2.imgbox.com/9d/33/aFjDE8b3_o.jpg
FileAxa
https://filecrypt.cc/Container/D722513790.html
https://fileaxa.com/vzilydt3tabs/ESXi.and.vSphere.vSwitch.Config.with.GNS3.rar
RapidGator
FileStore
https://filecrypt.cc/Container/824B7442CA.html
TurboBit
Видео
