https://img100.pixhost.to/images/404/537368816_que-es-udemy-analisis-opiniones.jpg
2.07 GB | 20min 23s | mp4 | 1280X720 | 16:9
Genre: eLearning | Language : English
Files Included :
1 Course introduction.mp4 (7.77 MB)
2 What is pipe stress analysis.mp4 (12.22 MB)
3 Types of loads & stresses.mp4 (8.82 MB)
4 Loads combinations & code compliance.mp4 (11.14 MB)
5 Types of supports.mp4 (14.49 MB)
6 Pipe stress analysis workflow.mp4 (27.33 MB)
7 About CAESAR II software.mp4 (12.93 MB)
1 Creating new model configuration.mp4 (34.2 MB)
10 Modeling steel structures.mp4 (69.62 MB)
11 Integration between piping and structural models.mp4 (40.53 MB)
12 Modeling surge vessel nozzle.mp4 (104.63 MB)
13 Adding windsiesmic loads.mp4 (61.75 MB)
14 Running error checker.mp4 (115.9 MB)
15 Manual model checking.mp4 (33.99 MB)
16 Setting up load cases.mp4 (73.64 MB)
2 Modeling pipe geometry.mp4 (99.39 MB)
3 Modeling pipe fittings including bends, tees & reducers.mp4 (97.88 MB)
4 Modeling valves & flanges.mp4 (48.04 MB)
5 Modeling pump nozzles.mp4 (81.7 MB)
6 Copy & paste & Stretching elements.mp4 (52.24 MB)
7 Adding rigid supports.mp4 (75.4 MB)
8 Adding trunnion supports.mp4 (86.73 MB)
9 Modeling & design of hangers.mp4 (58.06 MB)
1 Output processor.mp4 (49.83 MB)
2 Checking system deformations.mp4 (45.55 MB)
3 Code compliance check.mp4 (92.85 MB)
4 Optimizing supports.mp4 (141.48 MB)
5 Optimizing supports Expansion loop.mp4 (159.19 MB)
6 Checking forces on supports.mp4 (17.78 MB)
7 Checking forces on pumps nozzles.mp4 (56.01 MB)
8 Checking forces on surge vessels nozzles.mp4 (57.74 MB)
1 Underground pipeline systems.mp4 (18.69 MB)
2 Modeling of underground pipelines on CAESAR II.mp4 (8.55 MB)
3 Underground pipeline example on CAESAR II.mp4 (128.36 MB)
1 Conclusion.mp4 (9.48 MB)
2 Flange failure check using ASME code method.mp4 (98.97 MB)]
Screenshot
https://images2.imgbox.com/55/73/NGWNC49b_o.jpg
RapidGator
NitroFlare
Видео
